NATURAL DIALOGUE TO EXPLOSIVE SOUND

The 3050i Series 5.1 Cinema Pack will unleash the full potential of your home cinema electronics. Its exquisitely detailed sound will convey all the atmosphere, natural dialogue and, when required, the full bodied explosive drama of every video soundtrack. The 3050i 5.1 cinema package boasts P2P™ (Point to Point) bracing for additional cabinet stability for a purer, more dynamic home cinema sound. The Q 3050i floorstanding speakers also boast HPE™ technology which eliminates sympathetic resonance within the enclosures by equalising air pressure within the 3050i cabinet resulting in a purer, uncoloured sound.

PERFECT FOR MUSIC & MOVIES

Each speaker that forms part of the Q 3050 5.1 Cinema Pack is a genuine hi-fi speakers incorporating a wealth of technology applied to the entire 3000i Series – resulting in an exceptional cinematic performance – perfect for the larger room thanks to the inclusion of the Q 3050i floorstanding speaker. The Q 3050 5.1 Cinema Pack also delivers stunning musical performances.

EASY ROOM POSITIONING

Across the entire 3000i Series, conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. The speaker can be positioned very close to a rear wall even when banana plugs rather than spades or bare wires are used which means the Q 3050i 5.1 home cinema system can be a seamless addition to your listening room, especially with the choice of finishes.

The Q 3010i speakers can be shelf-mounted on compliant, pre-fitted rubber feet, stand-mounted or wall-mounted on optional, dedicated stands and brackets giving you ultimate flexibility in your home cinema setup.

The Q 3090Ci is the same width as most Amplifiers and AV Receivers so will fit attractively into the specialist furniture designed to house them and can also be shelf or cabinet mounted, or on dedicated wall brackets.

Q B12 subwoofer; bass frequencies are substantially omni-directional. Although this means that you can position the subwoofer almost anywhere, the stereo image will still benefit from positioning the subwoofer in line with the front loudspeakers and as central to the listening position as possible. However, this may not be feasible in a multichannel system. If you place the subwoofer too close to a wall the bass will be reinforced, therefore in some locations the bass may be boomy and indistinct.

The Q 3050i speakers boast a range of unique technologies including HPE™ and P2P™ to ensure these floorstanding speakers deliver a truly exceptional sound. Low profile binding posts have been incorporated into the Q 3050i with sockets deep enough to accept 4mm Banana Plugs. This floorstanding speaker can be positioned very close to a rear wall even when banana plugs rather than spades or bare wires are used.

BEAUTIFUL INSIDE AND OUT

Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.

Specifications 3010i:

Enclosure type: 2-way reflex

Bass Unit: 100 mm (4 in)

Treble Unit: 22 mm (0.9 in)

Frequency Response (+3 dB, -6 dB): 65 Hz – 30 kHz

Average Impedance: 6 Ohm

Minimum Impedance: 4 Ohm

Sensitivity (2.83 V@1 m): 86 dB

Stereo Amplifier: 15 - 75 W

AV Receiver (2 ch. driven): 50 - 125 W

Internal Amplifier Power: -

Crossover Frequency: 2.6 Hz (var)

Effective Volume: 4.0 L (244 cu in)

Dimensions H/W/D mm: 1020 x 210 x 310mm (320mm wide with stabilizers)

Weight (per speaker): 4.1 kg (9.0 lbs)

Specifications 3050i:

Enclosure type: 2-way reflex

Bass Unit: 2 x 165 mm ( 6.5 in)

Treble Unit: 22 mm (0.9 in)

Frequency Response (+3 dB, -6 dB): 44 Hz – 30 kHz

Average Impedance: 6 Ohm

Minimum Impedance: 4 Ohm

Sensitivity (2.83 V@1 m): 91 dB

Stereo Amplifier: 25 - 180 W

AV Receiver (2 ch. driven): 50 - 165 W

Internal Amplifier Power: -

Crossover Frequency: 2.5 Hz (var)

Effective Volume: 32.4 L (1977 cu in)

Dimensions H/W/D mm: 1020 x 310 x 310 mm (40.1 x 12.2 x 12.2 in)

Enclosure width: 200mm (7.9 in)

Weight (per speaker): 17.8 kg (39.2 lbs)

Specifications 3090i:

Enclosure type: 2-way reflex

Bass Unit: 2 x 100 mm (4 in)

Treble Unit: 22 mm (0.9 in)

Frequency Response (+3 dB, -6 dB): 75 Hz – 30 kHz

Average Impedance: 6 Ohm

Minimum Impedance: 4 Ohm

Sensitivity (2.83 V@1 m): 89 dB

Stereo Amplifier: 25 - 100 W

AV Receiver (2 ch. driven): 50 - 165 W

Internal Amplifier Power: -

Crossover Frequency: 2.7 kHz

Effective Volume: 6.6 L (403 cu in)

Dimensions H/W/D mm: 152 x 430 x 216 mm (6.0 x 16.9 x 8.5 in)

Weight (per speaker): 6 kg (13.2 lbs)

Specifications Q B12:

Drive unit: 305mm (12in) high-excursion and stiffness paper, straight-sided cone.

Peak Amplifier Power: 440 W

Continuous Amplifier Power: 220 W

Power type: Class D

Frequency range: 28 Hz - 300 Hz

Crossover frequency range: 40Hz – 250Hz

Input impedance: 13 kΩ

Input sensitivity: 150 mV

Enclosure type: Infinite baffle

Enclosure material: MDF

Dimensions (H / W / D) overall: 400 x 400 x 446 mm (15.7 x 15.7 x 17.6 in)

Weight: 47.40 lbs / (21.5 kg)