What Hifi Awards

Visit Our Blog

Monitor Audio MASS W200

Monitor Audio W200 sub-woofer is a power keg for bass

More details

€ 378.00

€ 420.00


Monitor Audio W200 sub-woofer

The W200 is a powder keg for bass, primed with the precision-crafted ordinance of twin drivers and a potent 220W DSP controlled Class D amplifier. It powers a side-firing 10” long throw C-CAM bass driver equipped with a huge, dual stack magnet system. Complementing the active driver is a 10” Auxiliary Bass Radiator (ABR), the two working in tandem to generate the output and scale normally associated with ported designs, but with the fast accurate transient response of a sealed box. Select ‘music’, ‘movie’ and ‘impact’ pre-set response curves using a back-panel switch.

*C-CAM cone technology
*10” flat ABR (Auxiliary Bass Radiator)
*Tuned for tight, fast bass punch
*220watt class-D power amplifier
*DSP providing accurate filter characteristics
*Advanced limiters designed to ensure the W200 never loses control.
*3 x pre-set bass modes (Music, Movie, Impact)
*12V trigger input – ensures W200 switches on and off with other equipment.
*Heavy duty MDF construction
*Discreet black cloth finish.

Monitor Audio W200 sub-woofer

System Format Active sub-woofer system - Auxilary (ABR) loading. 18mm MDF cabinet (CARB2 approved)
Low Frquency Limit 30Hz (-6dB)
Upper frequency limit Variable 40 - 120Hz @ 24dB/Octave
Amplifier Power Output 220 watts @ 1% THD+N
Amplifier Classification Class - D amplifier with Switch mode power supply (SMPSU)
Bass EQ Switch Music / Movie / Impact
Phase Control 0-180 degrees
Auto Sensing Line Level >3.5mmV
Input Level Requirements Standby after approx. 20 minutes if no signal sensed
Driver Compliment
1 x 10" (250mm) C-CAM® Long Throw Driver
1 x 10" (260mm) Auxilary bass radiator

Input Impendence > 20K Ohms
Mains input voltage 100 - 120 Vac / 220 - 240 Vac 50/60Hz (Factory Region Present)
Dimensions (H x W x D)
(Including grilles and feet) 420 x 385 x 385 mm / 169/16 x 163/16 x 163/16 Inches
Connections Stereo RCA in, LFE in, 12v Trigger in (3.5 mono mini-jack)
12v Trigger input 5 12v via 3.5 via mono mini-jack socket
Power Consumption 200 watts / 0.5 watts in Standby (ErP approved)
Weight 15.96Kg (35lb, 2oz)


Product successfully added to the product comparison!