What Hifi Awards

Visit Our Blog

Monitor Audio Bronze W10 Subwoofer

If you love deep and refined bass notes, the Bronze W10 is a must-have addition to your speaker set-up as every soundscape is effortlessly reinforced by our beautifully designed subwoofer.

More details

€ 719.00

The Bronze W10’s long-throw 10" C-CAM subwoofer driver combines with the 10" auxiliary bass radiator to bring a vivid realism to any performance.

Monitor Audio's engineers have acoustically improved the driver and bass radiator by reducing the moving masses and tuning the compliances in the system to improve the transient response - kick drumsand explosions now have much more punch and precision. Reduced moving mass and improved rubber feet allows more energy to be transmitted directly into the room rather than being lost through mechanical vibrations through the floor and walls.

The Bronze W10 is a stunning addition to any room.

Key Features

  • Long-throw 10" (250 mm) driver featuring ‘dished’ C-CAM
  • 10" (250 mm) flat panel Auxiliary Bass Radiator (ABR) positioned underneath the unit
  • Class D amplifier with high current Switch Mode Power Supply (SMPSU)

Bronze W10 Subwoofer

System FormatLong-throw 10” driver featuring ‘dished’ C-CAM cone. 10” flat panel ABR (Auxiliary Bass Radiator).
18 mm M.D.F. internally braced construction
Lower Frequency Limit-3 dB @ 33 Hz / -10 dB @ 28 Hz (Free Field)
Default preset: Music, -3 dB @ 29 Hz / -10 dB @ 25 Hz (In Room)
Upper Frequency Limit-6 dB @ 150 Hz
Drive Unit Complement1 x 250 mm (10”) C-CAM subwoofer driver featuring a 2” long throw voice coil
Linear Driver Excursion17 mm peak to peak
Amplifier Output220 W
Amplifier ClassificationClass D with high current Switch mode power supply (SMPSU)
Phase Control0 Degrees & 180 Degree pure Invert
Low Pass Filter Alignment2nd order (12 dB/Octave), from 40 Hz to 120 Hz
Equalisation DSP3 pre-set modes: Music, Movie, Impact
Auto SensingLine Level >3mV. Auto Standby feature after 20 mins
Audio InputsLFE unbalanced input RCA
Stereo unbalanced inputs RCA
Input Impedance20 kOhms input impedance
12 V Trigger3.5 mm mono mini-jack. 6 V threshold
Electrical CertificationsCE / CB / ETL / Fcc / CCC / ErP (Energy saving compliant)
Mains Input Voltage100 –120 Vac 50 – 60 Hz / 220 – 240 Vac 50 – 60 Hz (Manually selected)
Power ConsumptionMaximum 300 W, Standby <0.5 W (ErP compliance)
Fuse Type20 mm T4AL 250 VAC
External Dimensions including Amp, Drivers & Terminals (H x W x D)321 x 321 x 364 mm
External Dimensions including Amp, Drivers, Terminals & Feet (H x W x D)366.5 x 321 x 364 mm
Weight (Unpacked)13.4 kg / 29 lb 9 oz
FinishesBlack, White, Walnut, Urban Grey


Product successfully added to the product comparison!