Black Friday Sale 2018

Categories

What Hifi Awards

Panasonic Store

Visit Our Blog

Audio Technica AT-LP3 Automatic Turntable

What Hifi Award Winner 2017.  Best Turntable Under £200

Fully Automatic Belt-Drive Stereo Turntable with Universal Tonearm & Headshell

More details

€ 206.10

€ 229.00

-10%

Advanced Fully-Automatic Belt-Drive Turntable

A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.

  • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
  • Balanced straight tonearm with hydraulically damped lift control and lockable rest
  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
  • Switchable modes for moving magnet and moving coil cartridges
  • AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
  • Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
  • Damped base construction for reduced low-frequency feedback colouration

Mm / Mc Cartridge Selector Switch

Switchable MM/MC mode allows the listener to use both Moving Magnet and Moving Coil cartridges on their LP3, allowing for greater sonic customisation – a unique feature not found on most turntables with a built-in phono preamplifier.

AT91R Dual Moving Magnet Cartridge

Specially designed for the LP3, the AT91R Dual Moving Magnet™ phono cartridge incorporates an aluminium cantilever for higher-rigidity and improved pick-up of subtle details.

Universal Headshell

Removable universal AT-HS3 headshell allows users to upgrade their cartridge to further enhance their sound. Suitable for 1/2" mount cartridges and 4-pin turntable arms.

Balanced Tonearm

Incorporating a hydraulically damped lift control and lockable rest, the LP3’s straight balanced tonearm includes a radial ball bearing for horizontal movement and pivot bearings vertical movement.

4.5mm Platter Mat

Reducing unwanted vibration and for stable play, the LP3 includes a 4.5mm thick rubber platter mat.

Turntable
TypeFully Automatic, Belt-Drive
MotorDC motor
Speeds33-1/3 RPM, 45 RPM
Turntable PlatterDie-cast aluminium
Wow and FlutterLess than 0.2% WRMS (33 1/3 RPM) at3kHz
Signal-to-Noise Ratio> 60 dB
Output Level“PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec
“LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
Phono Pre-Amp Gain36dB nominal, RIAA equalised
56dB nominal, RIAA equalised
Power Supply Requirements220 to 240 V / 50, 60 Hz
Power Consumption2W
Dimensions435 mm ×353 mm×128 mm (W×D×H)
Weight5.2kg
Accessories IncludedRubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
Cartridge & Stylus
ModelAT91R
TypeVM Dual Magnet
Output Voltage3.5mV (mV at 1kHz, 5 cm/sec)
Vertical Tracking Force Range1.5 to 2.5g (standard 2.0g)
Stylus Construction0.6 mil bonded conical
CantileverAluminium pipe
Recommended Load Impedance47,000 ohms
Weight5.0g
Headshell
ModelAT-HS3
Weight11.1g
Overhang Adjustment8mm
Tone arm
TypeStatic balanced straight shaped with soft damping control
Effective Length221.5mm
Overhang19mm
Maximum Tracking Error AngleLess than 3°
Stylus Pressure Adjustment Range1 to 4g
Applicable Cartridge Weight14.5 to 20g
Anti-skating Range0 - 3 g

30 RELATED PRODUCTS

Product successfully added to the product comparison!