.

  • Out-of-Stock
Dali Rubicon 6 Floor Standing Speakers - Walnut

Dali Rubicon 6 Floorstanding Speakers

More powerful than its smaller siblings from the Rubicon series, with an enhanced and controlled performance. Delivering physical bass to fill a larger room with audio excellence.

€4,679.00
Tax included
Colour
Quantity

RUBICON 6 is a floor standing loudspeaker that features two 6½ inch woofers, each sporting its own bass port, gold-plated bi-wiring terminals and our innovative ribbon/soft dome hybrid tweeter module, which also was used in the EPICON series.

The RUBICON 6 is able to deliver more physical bass to fill a larger room, especially thanks to the woofers. The two woofers work together to move much more air, delivering more powerful bass and pumping out audio excellence that fills the room. The driver construction of the RUBICON 6 makes it even more powerful than its smaller siblings with an enhanced and controlled performance.

The RUBICON 6 can be matched with the RUBICON 2 or RUBICON LCR, the RUBICON VOKAL and the SUB M-10 D to create a surround setup. 

SMC MAGNET SYSTEM

With a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.

HYBRID TWEETER MODULE

The hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.

CABINET CONSTRUCTION

Dividing the mid-range and bass drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.

Rubicon 6 - Technical Specifications

Frequency Range [+/-3] dB [Hz] 38-34,000
Sensitivity [2.83V/1m] [dB] 88.5
Nominal Impedance [ohms] 4
Maximum SPL [dB] 110
Recommended Amp. Power [Watt] 40-200
Crossover Frequency [Hz] 800/2,600/14,000
Crossover Principle 2+½ + ½ -way
High Frequency Driver 1 x 29 mm Soft Dome
1 x 17 x 45 mm ribbon
Low Frequency Driver(s) 2 x 6½"
Enclosure Type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 33
Connection Input(s) Bi-wire/Bi-Amp
Recommended Placement Floor
Recommended Distance from Rear Wall to Speaker's Rear Side 20-180
Dimensions (H x W x D) [mm] 990 x 200 x 380
Dimensions (H x W x D) [inches] 39.1 x 7.9 x 15.0
Weight [kg/lb] 20.2/44.6
Accessories Spike Set,
Rubber feet,
Polishing cloth,
Manual

WOOD FIBRE CONES

Using a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.